DeCA mandatory now in force 5 Oct 2026 From 5 October 2026 the Spanish control document must be digital. Get ready today

DeCA mandatory data fields: what Spain's control document must include

What Spain's road freight control document must contain under article 6 of Order FOM/2861/2012, with worked examples, common mistakes and who answers for each field.

Pile of paper documents held together with coloured clips on an office desk, with reading glasses in front

Spain's road freight control document, now issued as a DeCA (Spain's electronic administrative control document), must contain the data listed in article 6 of Order FOM/2861/2012: contracting shipper, actual carrier, origin and destination, nature and weight of the goods, date of transport and registration plates, plus the special traffic permit and any remarks where they apply. These DeCA mandatory data fields are the same ones that used to go on paper; what has changed is that they now go into a PDF with a QR code. Below you will find them field by field, with examples, the mistakes that come up most often and who is liable for each one.

DeCA mandatory data fields at a glance

Article 6 of Order FOM/2861/2012, as worded by Royal Decree 70/2019, lists eight items of "essential" data, from a) to h). Six always apply. The other two depend on the job: the special permit only if the vehicle travels under one, and remarks only if one of the parties asks for them.

LetterDataWhenLiable party
a)Name or company name, tax ID (NIF) and address of the contracting shipper (cargador contractual)AlwaysContracting shipper
b)Name or company name and tax ID of the actual carrier (transportista efectivo)AlwaysContracting shipper
c)Place of origin and destination of the consignmentAlwaysContracting shipper
d)Nature and weight of the goodsAlwaysContracting shipper
e)Special traffic permitIf the vehicle travels under oneActual carrier
f)Date the transport is carried outAlwaysActual carrier
g)Vehicle registration (tractor unit and semi-trailer for articulated vehicles)AlwaysActual carrier
h)Remarks, reservations or other notesIf the parties ask for themWhoever adds them

This is a minimum. You can add whatever you like (order references, driver, number of packages), but if one of these fields is missing when it applies, the document is incomplete. Let us go through them one at a time.

Article 6, field by field

a) Name, tax ID and address of the contracting shipper

This is the only one of the two parties whose address is required, and it is where the first typical mistake appears: the contracting shipper is not always the company that loads the goods. If Cerámicas del Ebro, a tile manufacturer, books a job with a freight agency in Valencia and the agency passes it to Transportes Moncayo, Moncayo's contracting shipper is the agency. Field a) carries the agency's name, tax ID and address, while the address of the factory in Onda goes in as the place of origin.

The other common slip is entering the loading bay address as the shipper's address, or leaving it blank because "it is already in the origin field". They are different data: the address identifies who contracted the job and the origin says where the goods are loaded. If subcontracting chains raise questions for you, contracting shipper and actual carrier walks through several cases.

b) Name and tax ID of the actual carrier

This is the holder of the transport authorisation under which the trip is made. It is not the driver, nor the company that invoices the end customer. On a job that Moncayo subcontracts to an owner-driver from Tarazona, this field carries the owner-driver's name and tax ID.

No address is required for the actual carrier. What does need watching is the tax ID. A Spanish company's NIF (B12345674) and a self-employed person's NIF (12345678Z) follow different formats, and getting the last character, the check character, wrong is the silliest mistake of all and the easiest to avoid if the software validates it. If the actual carrier is a foreign haulier doing cabotage, the Order only refers to the NIF and does not say which foreign identifier to use, so agree with whoever issues the DeCA which tax number goes on it.

c) Place of origin and destination

The Order talks about the "place" and does not expressly require a full postal address. Even so, a town name on its own is of little use: Getafe has several industrial estates and Zaragoza has many more. The prudent approach is to give the loading and unloading addresses, or at least the industrial estate and street.

When a DeCA groups several consignments, each one must show its own origin and destination. That is one of the conditions for grouping set by the Resolution of 5 June 2026 of the Directorate-General for Road and Rail Transport.

d) Nature and weight of the goods

"General cargo" or "miscellaneous" says nothing. The description should be clear to an officer at first glance: "porcelain tiles on pallets", "flour in 25 kg sacks", "20/40 gravel in bulk".

On weight, the Order allows some flexibility in one specific situation. If the way the vehicle is loaded makes the exact weight hard to know, another measure is used instead: cubic metres, litres, pallets or packages. That happens with aggregates loaded by shovel at a quarry with no weighbridge, or with logs loaded in the forest.

The typical mistake goes the other way: a round figure that comes from nowhere. If Áridos del Jalón declares 25,000 kg and the weighbridge ticket at destination shows 27,340 kg, the document no longer reflects what was on the truck. The rules do not say expressly whether the weight must be updated when the ticket does not match the estimate. If the difference is significant, the prudent course is to record it through an amendment to the DeCA.

e) Special traffic permit

This is only filled in when the vehicle travels under a special permit issued by the traffic authority. Think of abnormal loads: a low loader carrying an excavator, an oversized piece of fabricated steelwork or wind turbine blades. If Moncayo moves a wheel loader for Áridos del Jalón on a low loader under a special permit, the permit's identification goes on the DeCA.

If there is no special permit, the field does not apply. There is no need to write anything or make up a number.

f) Date of transport

This is the day the job is done, not the order date or the invoice date. Nor should it be confused with the DeCA's creation date and time, which the application stores in the PDF metadata. If the planning office issues on Monday afternoon a job that leaves before dawn on Tuesday, the transport date is Tuesday and the creation date is Monday. That gap is exactly what proves the document existed before the service began.

For trips lasting more than one day, the rules do not make clear whether the departure date is enough. Giving the departure date and the expected arrival date avoids doubts.

g) Vehicle registration

An articulated vehicle needs two plates on the document: the tractor unit's and the semi-trailer's or trailer's. Leaving out the second one is a very common slip, because the tractor unit is what everyone sees and the semi-trailer is sometimes coupled at the depot at the last minute. Tractor unit 4821 LKM with semi-trailer R-7745-BCX means both plates on the document; a rigid truck with a drawbar trailer, likewise.

If the vehicle changes once the trip has started, for example because the tractor unit breaks down near Alfajarín and another one is sent to collect the semi-trailer, the change must be recorded on the document. With the DeCA this is done through one of the two methods in the Resolution, never by crossing things out on the printed copy. Both methods are explained with examples in how to amend a DeCA during the service.

h) Remarks, reservations or other notes

These are only mandatory when one of the parties asks for them to be included. They are there to put things in writing, such as "shrink-wrapped pallets, do not stack", "transport temperature 0 to 4 °C" or a reservation about the condition of the goods at loading. Each party is liable for the remarks it adds.

What article 6 does not require

Some data are often assumed to be mandatory when the Order does not ask for them. A signature is not mandatory on the DeCA: the June Resolution says so expressly, and only requires at least an advanced electronic signature when the document is also used for contractual purposes and is signed. The driver's name is not mandatory for goods transport either, unlike the route sheet used for passenger transport. And there is no requirement for the consignee's name, the price of the job or order references.

Nothing stops you from adding them. The point is not to confuse optional with essential: a DeCA without the customer's signature is valid, while one without the semi-trailer's plate is incomplete.

Who is liable for each field

Liability is set out in article 7 of the Order, which Order TRM/282/2026 of 25 March corrected because its cross-references had gone out of step after article 6 was reworded in 2019. It now works like this:

  • The contracting shipper is liable for missing or inaccurate data in fields a), b), c) and d), and for any remarks it adds.
  • The actual carrier is liable for fields e), f) and g), and for any remarks it adds.
  • Both are liable if the document is not drawn up or is not on board, although the shipper is exempt on the second point if it proves it issued the document.

Under that split, liability follows the field, not whoever typed it. If the agency issues the DeCA and gets the plate wrong, that field belongs to the actual carrier; if the carrier issues it and gets the shipper's tax ID wrong, that field belongs to the shipper. That is why it makes sense for each party to check its own fields before the truck leaves.

A missing essential field is a serious infringement under article 141.17 of Spain's Land Transport Act (LOTT), with a fine of 401 to 600 euros. Falsifying data is another matter: a very serious infringement under article 140.9, with a fine of 4,001 to 6,000 euros. There is more detail in fines for the control document.

How to avoid mistakes without relying on memory

Most of these errors come from haste, not bad faith. Three habits cut them down a lot:

  • An address book of customers, carriers, places and vehicles with data checked once, so nobody retypes a tax ID or an address for every job.
  • Templates for repeat routes, so origin, destination and goods always come out the same.
  • A system that will not issue a document with a required field missing and that warns you when a tax ID or plate is not in a valid format.

To see all these fields laid out in a finished document, have a look at our DeCA example in PDF, built around a job from Castellón to Getafe.

LeyDeca works that way: it will not issue a DeCA if an article 6 field is missing, and it validates tax IDs and plate formats. You can see the rest in the DeCA software features.

FAQ

Frequently asked questions

What people ask us most about this.

Does the driver's name have to appear on a DeCA?

No, not for goods transport. Article 6 of Order FOM/2861/2012 asks for the name and tax ID of the actual carrier, not of the driver. The driver's name is mandatory on the route sheet used for passenger transport, which is a different document. You can add it to the DeCA as extra information if it helps you organise the work, but leaving it out does not mean an essential field is missing.

Whose address goes on the DeCA when a freight agency books the job?

The agency's. The address required in field a) of article 6 is that of the contracting shipper, meaning whoever contracts directly with the actual carrier. If a manufacturer books with an agency and the agency subcontracts the trip, the carrier's contracting shipper is the agency: its name, tax ID and address. The manufacturer's address then appears as the consignment's place of origin.

Does a DeCA need the exact loading and unloading address?

The Order asks for the place of origin and destination of the consignment and does not expressly require a full postal address. Even so, a town name on its own is of little use, especially where there are several industrial estates. The prudent approach is to give the address, or at least the industrial estate and street, for loading and unloading. If a DeCA groups several consignments, each one needs its own.

Do I need the semi-trailer's plate or is the tractor unit's enough?

You need both. Field g) of article 6 requires the registration of both the tractor unit and the semi-trailer or trailer for an articulated vehicle. If the tractor unit or semi-trailer is swapped during the trip, that must also be reflected in the document, and with a DeCA this is done through an amendment in the system, not by writing on the printed copy.

Who is liable if the plate on the DeCA is wrong?

The actual carrier. Under the wording that Order TRM/282/2026 gave to article 7 of Order FOM/2861/2012, the carrier is liable for the special permit, the date and the plates, while the contracting shipper is liable for its own details, the carrier's details, origin, destination and goods. It does not matter who typed the DeCA: what counts is which field is involved.

Does the consignee have to be named on the control document?

Not as a field in its own right. Article 6 asks for the place of origin and destination of the consignment, but not the name of whoever receives the goods. You can include it as extra information, since it helps at unloading and on the delivery note. What cannot be missing is the place of destination and, if a DeCA groups several consignments, each consignment needs its own.